News
manufacture kinds of solenoid valve
Our factory research and manufacture kinds of solenoid valve
All serial solenoid valves have high quality,good looking and cost-saving etc. charateristics
Meanwhile,our factory provides customized pneumatic products and system solution project
Contact us and apply for more information
With comparatively high working pressure and temperature, the THP series valve has a completely range of solenoid valves from 1/8”± to 2”±. We have stainless steel valve and brass ”
2V sereis direct acting solenoid valves are from 1/8"~1", supporting higher pressure 1.0MPa,with lower power consumption,very compact and cost effective.”
1/8"~1/2" direct acting solenoid valves with working pressure of 0~1.0MPa. A good replacement for SMC solenoid valves.”
PU/PUT direct acting solenoid valves has a thread range from 1/8" to 1/2", and of which 3/8"~1" could be equipped with timer to control water drain timely.”
US series two two way pilot valve has a wide range of thread sizes from 3/8”± to 2”±. This valve can support high temperature 180”ę, so mostly for steam medium, we also call it ste”
HUS series stainless steel high temperature solenoid valve has a wide range of thread sizes from 3/8”± to 2”±, also we have flange connection. This valve can support high temperatu”
Solenoid Valve, pneumatic valve, pneumatic component
Specifications
|
Fluid |
40 micron filtered air |
|
Operation |
Inside pilot type |
|
Operating pressure |
0.1~0.8MPa |
|
Max. proof pressure |
1.2MPa |
|
Ambient temperature |
5~50 |
|
Allowable voltage |
”Ą10% of rated voltage |
|
Power consumption |
AC:2.5VA DC:2.5W |
|
Coil insulation & protection grade |
Class F. IP65 |
|
Electrical entry |
Lead wire or connector |
|
Highest action frequency |
5 cycle / second |
|
Shortest excitation time |
0.05 second |
