News
EMF serive cylinder, china hydraulic cylinder
-
Features:
1. Many optional sizes,bore size can be from 25mm to 300mm;2. Working pressure :16 to 32 Mpa;3. Fixing type: trunnion or flange or according to customers¡¯ requirements.4. High intensity fatigue design, adapative cylinder designed as per loading frequency analysis are applied,and piston rod selection,processing and welding technology are inspected through ultrasonic falt detection. As it is designed for high pressure operation,it is featured in small size ,light weight,high intensity and high reliability.5. Seal system. Seal rings of NOK from Japan and Parker from USA that can overcome engineering construction conditions. As well as special designed seal system is applied to prevent grit and dust,reduce oil leakage.6. Cylinder body. The thickness of the cylinder body and frange can be changed;the cylinder inner surfaces manufactured as per appropriate intensity and dimensions have excellent roughness and rigidity and better wearing capacity after roll finishing.7. Piston Rod. High frequency quenching followed by hard chrome plating to improve rust proofing and wear and scar resisting performance.8. Safety / buffer functions. Valves with slow stroke,counting balance and emergency close can be installed easily according to requirements. The concealed ones can absorb the impact of buffer device at the end of stroke.We can make different kinds of hydraulic cylinders according to our customer's requirements,including tie-rod, welded, ram, telescopic type.In terms of motion,hydraulic cylinders can be of single action or double action design.The max pressure we can make is 38 Mpa.The bore size can be from 32mm to 1000mm,and the max stroke can be 8 meters long.For anything about hydraulic cylinders, just feel free to send email hydraulic@emc-machinery.com
