Rotary Cylinder
Rotary Cylinder
normal conditions: Ambient temperature -35 to 80 degrees, Working pressure 0.4-0.6MPA.
Pre-installation should be 1.5 times the working pressure under the conditions tested, should not leak.
Assembly, all components of the relative movement of sealing the working surface should be coated with grease.
Installation of air source must be set to the entrance of air supply adjustment device: Filter - Regulator - Lubricator.
Note that the piston rod should be installed to withstand tensile load, thrust load should be as far as possible to bear loads in the piston rod axis, the piston rod, eccentric or lateral loads are not allowed to bear.
Load has changed during his visit should be used when the output power of adequate cylinder, and attached to a buffer device. 
As mentioned earlier, try not to use the full itinerary.
With no external leakage, the SW series can be used in many diverse environments. Magnetically coupled cylinders have a wide range of applications, and save mounting space. Loads and moments are possible through the use of integrated guides. A variety of guides can be used to achieve the necessary accuracy or allowable moment needed for your application. SW is available in 9 bore sizes, from 6mm to 63mm with standard stokes up to 1000mm. The 5 different model variations offer widest application choice. Auto switches are integrated as standard.
