Mini Solenoid Valve
The Mini Solenoid Valve info:
Material: Stainless steel core and springs,nylon body and Buna-N seals
Operating Pressure: 0~7 bar
Orifice Size: 2mm
Kinds: 3/2 ways normally closed
Fluid/ambient temperture: -5 ~+ 50 oC
maximun flow rate at 6bar with p 1bar: 30 NI/min
Exhaust: 50 NI/min
Max number of cycles per minute: 2400/min
Life expectancy: more than 50 Million times
Voltage: 24V DC -15% ~ +10%
Power: 2.3W
Response time when energized: 6 ms
Response time when de-energized: 8ms
Copper wire isolation chass: F (155 oC)
The Conflux board(manifolds) & solenoid valves are our new self-developed products used in textile rmbroidery, knitting electronices and other equipment. It has the advantages of compact structure and taking little space,conventient installation,sensitiveness,stable performance,and so on. Moreover,it is protected by two potents.
Useage: Convergent plates are used in combined the solenoid valves, 2/3/5/7/8/10/12/28 combinded electromagnetic valve Plates are available
|
Model |
FCD.3-148BF |
FCD.3-148H |
FCD.3-148A |
FCD.3-148U |
FCD.3-148 |
|
Action way |
Pilot type | ||||
|
Type |
NC self-holding (at impulse voltage) | ||||
|
Working pressure |
0.02MPa-0.8MPa | ||||
|
Connection way |
Fastening of four tenths
female thread |
Four tenths male thread | |||
|
Applicable medium |
Water | ||||
|
Valve body material |
Plastic valve body copper joint
|
Plastic | |||
|
Medium temperature |
0-50oC | ||||
|
Environment temperature |
0-40oC | ||||
|
Rated voltage |
The power of AC220V, AC110V, DC110V, AC48V, DC48V, AC36V and DC36Vis 6W. The power of pulse 4.5V and pulse 3.6V is 2.5W. The power of AC24V, DC24V, AC12V, DC9V and DC12V is 5W. | ||||
|
Variable voltage of supply voltage |
-10%~+10% | ||||
|
Insulation resistance |
Tested by DC500V megohmmete for 1 min, the insulation resistance should¡Ý100M | ||||
|
Watertight performance |
Hydrostatic pressure 0.02Mpa,leakage ratio<0.1mL/min
Hydrostatic pressure 0.03~0.8Mpa,leakage ratio 0mL/min | ||||
|
Hydraulic pressure withstand |
Withstand hydrostatic pressure of 1.2MPa for 5min, no unbroken, deformation or outside leakage | ||||
|
Reliability |
0.01~0.02MPa,make and break for 10s respectively, lasting 1h, the check valve should be unblocked. | ||||
|
Flow characteristics |
Pressure 0.02Mpa Flux >3L/min Pressure 0.1Mpa Flux >8L/min Pressure 0.3Mpa Flux >13L/min Pressure 0.8Mpa Flux >25L/min | ||||
|
Across layers insulation |
Withstand high voltage pulse for 2s, it should be normal. | ||||
|
Continuously energized |
Energize for 12h, but not connect through the water, the valve should be no deformation, and the coil should not be burned; | ||||
|
Withstand voltage |
The acceptable high-voltage power between electric conduction and outer without electrified metal Withstand AC1500V,50Hz for 1min, no flashover or breakdown; Withstand 1800V,50Hz for 1s, no flashover or breakdown; | ||||
|
Non-return function |
Yes | ||||
|
Filtering function |
Built-out filter screen |
built-in filter screen |
Built-out filter screen |
built-in filter screen | |
|
Adjustment function |
No
| ||||
|
Angle between coil and valve body |
360;270;180;90 | ||||
|
Power supply connection way |
Inserting type, adopting 6.3 plug spring | ||||
